All

High Quality Cross Cutter by Band Saw & Disk Saw for Overlapping Cutting for Roof Panel

Inquiry

Overview
Inquiry
Related Products

The perfect cutting unit has to have the cutting speed is synchronized with the panel conveying speed.

This cutting unit has to be also operated by the manual or automatic control.

Product Details

Cross cutter by band saw：

Main feature:

1.The perfect cutting unit has to have the cutting speed is synchronized with the panel conveying speed.

2.This cutting unit has to be also operated by the manual or automatic control.

3.The gantry is set at the rear and the saw unit is positioned at the right-hand side as viewed from direction of production. In this position, the band saw blade may also be exchanged.

4.The cross cutter is designed in such a way that the saw band can be changed without production stop since the exchange takes only 1~2 minute.

5.The double belt line conveys the sandwich panel at a pre-adjusted speed.

6.An incremental encoder is installed at the turning shaft of the double belt measures the length of the endless panel.

7.The pulses are transferred to the microprocessor control of the saw.

8.he band saw waits for the start signal depending on the panel length and then accelerates the X-axle to maximum speed so that the speeds of the endless panel and the band saw are equal.

9. After synchronization of both speeds and offset control, the clamping units are pneumatically actuated to clamp the front and back of panel and then the band saw carries out the first cut from left to right front directionThe saw unit is in motion until the second blade section has also left the cut. The cut panel is lying on a non-driven roller conveyor and is pushed out of the operating area of the saw by the panel coming from behind.The saw unit returns to the starting position at a maximum speed and turns about 180. At this position the band saw waits for the next start signal (depending on the length of the sandwich panel) and the above described procedure starts again.

10.Cutting direction is now from right to left.

11.Operating panel is equipped out of housing and Panel can be automatically cut without worker in case the data of panel length and quantity.

12.Automatic or manual work is optional and manual work is used for cutting to a desired length of panel once panel is cut by automatic work.

Technical Parameter：

High Quality Cross Cutter by Band Saw & Disk Saw for Overlapping Cutting for Roof Panel details

Specifications

High Quality Cross Cutter by Band Saw & Disk Saw for Overlapping Cutting for Roof Panel manufacture

Company and Service Advantages:

1.The company workshop 40,000 square meters, has introduced the first-class multi-station machining center, CNC lathes, CNC milling machines and other high-precision processing equipment. Such as the value of 4.5 million yuan 3mx8m gantry machining center, and the value of 300 million yuan 2.5 mx12m gantry milling machine.

2.The company has a professional The Adjuster team, 24 hours to provide uninterrupted after-sales service.
(1) Installation and debugging
Equipment arrived at the customer workshop, according to the flat layout of our equipment. We will arrange experienced technicians to install, debug and test-produce the equipment, and make the equipment reach the rated production capacity of the production
line.
(2) Training
Our company provides technical training for our customers. The training includes the structure and maintenance of the equipment, the control and operation of the equipment, experienced technicians will guide and establish the training program. After training, the buyer's technical personnel can master the operation and maintenance of the equipment, can adjust the process and deal with different failures.

3.After-sales quality problems within 2 hours to answer, if the telephone video guidance can not be solved, domestic 24 hours to send engineers to the site to solve the problem.

4. Factory direct sales price concessions, 40,000 square meters factory, 20 years of Export Enterprises, CE certification, patents more than 100 items.

High Quality Cross Cutter by Band Saw & Disk Saw for Overlapping Cutting for Roof Panel factory

High Quality Cross Cutter by Band Saw & Disk Saw for Overlapping Cutting for Roof Panel supplier

ITEMS	TYPE/UNIT	SP-PU-C
Color Steel Sandwich Panel Specifications	mm	Width: 700 ~ 1000 Thickness: 30 ~ 150
Production Line Speed	m/min	3~8
The Maximum Temperature of The Hot Air Circulation	°C	70
Total Power	kw	300
Line Dimensions (L × W × H)	mm	86000×7000×3800
The Total Installed Power Capacity	kw	207
Stove Power	kcal	200,000
Double Belt Iaminated Conveyor Length	m	24

Main Features:

1. Panel from the continuous sandwich panel production line is a composite structure consisting of two external facings and an insulating core. The core can be flexible with Polyurethane, Mineral Wool, Glass Wool, PIR, Phenolic or EPS. Various profiles are available according to customer's requirement with pre-painted steel sheets, PVC sheets, Aluminum paper or other similar supports.

2. The continuous sandwich panel production line has a large scale production capacity. It allows a uniform distribution of the reactive mixture, a homogeneous density, suitable physical and mechanical characteristics.

3. Roof panels, wall panels and door panels are mainly made of metal section support and polyurethane insulating mass.

4. The capacity of the continuous line is 3-7m/min, length of the production line is 100m, the size of the final panel is 3-18m long, 900-1200mm wide, 20-150mm thick, the valid length of double belt conveyor is 24m, the total power is 300kw.